Changing the Future

There has been a lot of hubbub recently (at least in the news cycle that I follow) about Apple changing the physical connector on the bottom of their latest generation of iDevices. The old connector, which was unimaginatively called the dock connector (or 30-pin connector, for the number of electrical contacts in the dock), was used to connect Apple’s entire product line of mobile devices to power or to computers for syncing. This connector was first introduced in 2003 with Apple’s third iteration of the iPod line, and has been featured on every iPod, iPhone and iPad, save for the newest iPod shuffles, shipped in the last 9 years. I have personally owned about 10 of these cables at one point or another, with at least 5 other products or accessories in my apartment having the familiar 30-pin connector built in.

So, when Apple made the executive decision (it probably wasn’t executives making this decision by the way) to change to a new 8-pin connector (technically 16, but I’ll get into that in a moment), it instantly rendered all of these cables and accessories obsolete. Now, not too many people are surprised by this move, it has been rumoured that they would soon be required to move to a new connector, but with the secrecy involved in design and technical specifications at Apple, nobody was too sure what it would look like or when it would be implemented.

New Lightning to USB cable.

The new connector, dubbed “Lightning” (which accompanies the “Thunderbolt” connector for high data throughput devices like solid-state hard drives and HD monitors) is 80% smaller than the older generation connector, and is also symmetrical, meaning that orientation is irrelevant when inserting the plug. The previous 30-pin paradigm used sets of different pins for the various functions that a given device could be used for with a given accessory. For example, in a device with 30 pins, there are dedicated pins which pass analog audio (regular sound, exactly the same as through headphones) through them, for example in a speaker dock. While this does negate the need for having software to allow the device to communicate with the speakers (this software is called a driver, and it is what you see being installed when you plug an iPod or USB flash drive into your computer before you can use it), it does mean that a lot of pins are redundant for most uses. The beauty of having this connector, as opposed to, say, micro-USB as is the standard elsewhere in the smartphone industry, is that it means that when the device is docked, you can actually control playback of the music with buttons on the device itself, or with a remote that accompanies the device. It also lets the dock display track information on its display, if it wishes to do so. Because of the way micro-USB is structured, with only four pins, you simply cannot do this. This is why you will never see a speaker dock with a micro-USB dock, because it would be technically difficult and needlessly expensive to put software into the speaker system to allow it to read the music files and play them back. These devices simply fall back to the headphone jack to play music, but is very limiting in what you can do, that is essentially just play audio. The Apple ecosystem, though full of more expensive proprietary connectors which need to be licensed from Apple, do far more than a simple micro-USB and analog audio connectors on the systems of competitors.

Realistically, most people only use two pins for charging the device, two more for syncing, and maybe the four pins for analog audio with various controls through speaker docks. In a world where sizes are measured in mm’s, every last little bit of space counts, and going down to 8 pins saves a tremendous amount of space, and because the pins are all digital, the software is able to adapt their use to whatever the situation requires. It really is quite a wonderful design.

The new 30-pin to Lightning adapter:
deceptively simple.

Another important point about this connector is that people are saying that the price for these adapters, when they are launched, are laughably high for being such simple pieces of metal and plastic. The adapter from 30-pin to Lightning costs $35 in Canada, and a 20 cm cable which extends a 30-pin connector to Lightning is going for $45. Now, I cannot argue that adding $10 for a 20 cm length of cable isn’t extortion, because it truly is, but the design and functionality of the adapter itself is not as simple as just joining up wires and coating it in plastic. Because of the way the Lightning connector is wired, there is no wrong way to plug it in. This is in stark contrast to the typical computer connector, which has a 50% chance of being inserted incorrectly when in a rush. This doesn’t seem like a big deal to consumers who are used to it, but for a company who prides itself on things “just work(ing)”, simplicity is extremely important. And in the use of these adapters, there are electronics inside which enable this bilateral insertion of the connector, taking the 30-pin connector, which only plugs in one way, to a Lightning connector, which can work either way. I assure you there is far more to this design than meets the eye, though it is designed to look effortless. This is true of all of Apple’s adapters, make no mistake that they are of the highest quality, and that they have thought everything through, so you don’t have to. And peace of mind is always going to come at a premium.

Last year’s iPod nano (bottom view)
New iPod nano, 3.5 mm audio jack is
width of device itself.

Finally, if you take a look at the difference between last years iPod nano (from the bottom; left), and this years (right), the striking difference is in the thickness of the actual electronics. Last years model was designed with the understanding that it couldn’t be thinner than the 30-pin connector, and so it was designed to exactly that specification in two of its three dimensions. With the new generation, they have made it substantially thinner, down almost to the size of the Lightning connector in thickness, while making it taller to allow added room for the electronics, so that the volume comes out to about the same. This connector is a very refreshing change, and makes me confident that Apple knows what it is doing, at least for a few more years.

I, for one, am right on board with the change. Anything that can make my life simpler and more efficient is worth investing in, and the caveat that I have get to buy some more new gadgets to play with and review for you guys is just an added bonus!

Obligatory iPhone post (New Design)

Okay guys, I hate to do this, but I have to say one thing about the fact that the newest iPhone is being announced tomorrow. And it’s not about things that everyone on the internet are saying are going to be in it, or whether it’s going to be called “The new iPhone” or iPhone 5 or iPhone 6. I’d like to briefly debate myself a little bit about what it is going to look like. Now, all of the important blogs have been all over this story for months, with leaked designs that look something like this (left, both black and white below): Simply type in “iPhone 5 rumor” into an image search for pages of this design.

Now, it is pretty likely that the next iPhone will look similar to this or even exactly like it. But if that is the case, I will be really disappointed. This design looks extremely iterative, and as far as I can tell doesn’t follow Apple’s design aesthetic at all. With the rumours that the body will be made from one piece of steel or possibly aluminum, the gaps in the steel band on the side of the phone (seen on the left) aren’t very likely. Even though these gaps are to separate the antennae which make up the various radio transmitters for the phone’s wireless signals, you have to imagine that if they are building the phone out of one piece of metal, they would have found an alternate, better way to make this work. While the two-tone design does seem to work better in the top photo in black, making that particular design a far more likely choice, I very sincerely hope that they go with a different design. If you search for “matte iPhone 5” on images, you will come up with the design I very much hope they settled on. For that to be the case, one of two things must have happened at some point. Either Apple put out some older prototypes and let the rumour mill take over (which would be really great and bad-ass on their part), or somebody saw one of the design ideas and decided to make parts and prototypes on their own, looking very official and which fit the existing dimensions of the rumoured device. I have a feeling this is much more likely, since a prototype device getting out of Apple’s factory that early and that frequently seems really unlikely, coupled with the fact that I think they can design something much better.

Personally, out of all the images I have seen, this one is my personal favorite: (sourced from, with a video (which is still likely not real)). This matte finish and very clean lines and design scream Apple, and getting rid of the ridges which exist on the current 4/4S design needed to happen. Ideally this device will be less prone to breaking its glass (though I have personally only ever scratched the back of my phone, I have spoken to many people who have cracked screens and refuse to remove their new phones from Otterboxes).

There’s not long to wait now, as of 6 EST we’re only 19 hours from Apple’s annoucement. I, for one, will be watching intently to see what the new phone looks like, and I may even write a little tomorrow while I’m eagerly awaiting the news. I know most people don’t follow this kind of news all that intently, or follow it at all, so I’d like to shine some light on why I do, and what I gain from it. Should be fun! See you then.

I’m a writer, er…right?

Since I’m having a really slow day, and Apple isn’t making their big announcement until Wednesday, I thought right now would be the perfect time to reflect on what I have done so far since starting this blog little over a year ago. At that time, Google+ was an absolute ghost town, and I was buckling down to try to finish my degree. In the year and a bit that has passed, I have written more words than I had up until that point in my life combined. Between emails, cover letters, blog posts, letters to significant others, and my thesis and corresponding journal article, I have written many, many thousands of words. Because I have a strong feeling that I have been trying to find myself, and who I want to be, during that time, I suspect that all this writing is probably connected with this feeling of being lost. It is probably also significant that I have read much more in the last year about the world around me (as opposed to my youth which consisted almost solely of fictional works, or scientific writing). Writing has become a very important outlet for me, and I find that I really have no interest in writing down my thoughts for myself (like a journal or diary), but that I strongly prefer sharing what I write in a public forum. While this does severely limit me in terms of what I can write about (I would surely be unable to find a job if some of what rolls around in my head were publicly available for perusal by perspective employers on the internet), it still means that I can declutter my own thoughts and sort out a variety of issues I spend a large part of my time mulling over. The added bonus is the great feedback I get from you people out there reading. I am starting to notice, for the first time, that my apparent readership is almost certainly outside of my everyday social circle, because I am getting into the 100s of pageviews per day, and I share this work with only about 35 people on Facebook, and about 70 people on Twitter, and I’m almost positive most people among that group aren’t taking the time to click on these links. I really do appreciate the feedback I get in writing, and it really encourages me to keep going. On that note, I am hoping to do a little self-promotion before actually talking about what I was hoping to get to today.

I encourage everybody who comes here and reads this to make suggestions as to what topics I could/should cover in upcoming posts, either through my website, or directly via this link. So far I have only had the universally unhelpful suggestion of ‘ur gay’, but I hope that with some more direction as to what people want to know more about, I can keep posting more often and more relevantly.

The issue which has come to my attention recently, but which has always had a place in the back of my mind, is that of writing as more than just a hobby. If I already have the ability to write a decent amount in a short time, and a knack for breaking, or outright ignoring literary rules, what’s stopping me from trying to trying to call myself a “professional” writer. There are certainly qualifications as to what makes a “successful” writer, but as far as I know, nobody can tell me that I’m not a writer. To me, if I write, by the very definition of the word, I am a writer. That being said, all I need to legitimize that sort of idea is to have a feasible way of actually making money from the act of writing. There are many different outlets that would allow this to become a reality, but obviously a few seem more likely than others. Comedy writer (a la, is an obvious choice, but I fear that trying to be funny might ruin any incidental humour my writing might otherwise elicit. Technology writer, which would encompass writing product and app reviews, as well as discussing various new and interesting technological and scientific stories, is something that I find greatly appealing, and which I would probably do well at given my attention to details and background in relation to those topics. It would interest me to write about politics, but Canadian politics is too boring and partisan to be made very interesting, and American politics is worse than an argument about religion (mainly because it is made out to not come down to an argument about religion). I firmly believe that any opinion or argument that is not based on reason is completely invalidated, and thus while discussing these topics will appeal to those who believe in reason (and which I would find interesting), it is not worth having to argue with those who don’t. For that reason, if I do choose to write about something with staunch supporters on either side, it will happen very infrequently.

Those are just a few options of things I have thought about pursuing in recent past, and it remains to be seen what exactly will come to pass. One thing is for certain though, I don’t know that I’ll be able to stop writing.